Estimate mechanical packages, bid on 2x more projects
The Takeoff AI estimates from the whole industrial package, counting the pipe, valves, fittings, columns, beams and welds, with labor hours on every line. Built for industrial estimating teams.
American Steel Fabricators uses The Takeoff AI to save 80% of the estimating time on a bid that runs around 45 hours.
Peter Sirois
Managing Director,
American Steel Fabricators
The Takeoff AI Estimates Projects the Way You Do
The Takeoff AI takes the drawing set as it arrives and counts what is on it, whatever condition the sheets are in.
Ductwork and Air Devices
Measures duct runs off the plan, picks up fittings and transitions by size, and counts diffusers, grilles, and registers by type.
Equipment Schedules
Pulls every AHU (air handling unit), RTU (rooftop unit), fan coil, and pump from the mechanical schedule with its tag, capacity, and service.
GAs and Isometrics
Measures lengths off the scaled GA when isometrics don’t exist yet, and where they do, cross-checks the BOM table against the drawing body.
HVAC Piping
Counts hydronic and refrigerant piping off plans, sections, and schedules, and derives supports and insulation as labeled factors you can adjust.
Material Nobody Draws
Derives gaskets, bolts, and hangers from joint counts and spacing rules, labels all of it, and never buries it in the count.
How The Takeoff AI Does a Mechanical Takeoff
From the package landing on your shared drive to a priced bill of material in three steps.
Upload the Mechanical Package
Drop in the whole scope, drawings and schedules together, and The Takeoff AI scans every sheet, reading each title block before it counts anything.
Mechanical Takeoff
It identifies every valve, fitting, flange, weld, equipment item and steel member, then sizes and classes each one against the line list and spec.
Get the Bill of Material
Quantities arrive grouped by system and spec, with supports and hangers derived, and every count links back to the sheet a reviewer can click into.
Industrial Estimating Software built for Mechanical Work
Watch The Takeoff AI run a full mechanical takeoff on an industrial bid package, with every count traced to its sheet.
Book A Takeoff Walkthrough